Doosan DX340LC-5 excavatorSwing Reduction Gear Removal.
This article introduces the disassembly of Doosan DX340LC-5 excavator swing reduction gear 1. Park on firm and level ground . 2. Lower front attachment ( bucket ) to ground . 3. Shut down engine . 4. Set safety lever on " RELEASED " position . Doosan Diagnostic Tool UVIM Support Doosan Excavators High Quality 5. Turn starter switch to "I" ( ON ) position . WARNING! If engine must be running while performing maintenance, always use extreme caution. Always have one person in cab at all times . Never leave cab with engine running. 6. Fully stroke work levers ( joysticks ) in all directions to relieve any pressure from accumulat ors. 7. Set safety lever on " LOCK " position . 8. Turn key to "O" ( OFF ) position and remove fr